Module Ultrasonic Flow Meter

Position :Home> Products >Flow Meter >Ultrasonic Flow Meter > Module Ultrasonic Flow Meter

Main Board	Transducer
IP Grade	IP30	IP68
Humidity	≤ 80% RH	IP68
Temperature	-20 ~ 60℃	-30~160℃

Accuracy	≤1%
Velocity	0 ~ ±10 m/s, forward and reverse measurement
Pipe Size	DN32 - DN6000 mm
Medium Temperature	-30℃ ~160℃
Medium	Water,seawater,sewage,beer,alcohol,Acid-base liquid, oils,etc, All Homogeneous liquids which can conduct ultrasound
Pipe Material	Steel,stainless steel,cast iron,copper,PVC,aluminium,glass fiber,etc. All dense pipes,liner is available.
Signal Output	4~20 mA
	OCT pulse
	Relay
Signal Input	4-20mA, three channels, can be used for data collector; Tri-wire resistance signal input (PT100): two channels, can be used for calorimeter.
Communication Interface	Isolated RS485 serial interface,support Modbus.
Power Supply	DC8~36V, AC10~30V

Main Board	Transducer
IP Grade	IP30	IP68
Humidity	≤ 80% RH	IP68
Temperature	-20 ~ 60℃	-30~160℃

Accuracy	≤1%
Velocity	0 ~ ±10 m/s, forward and reverse measurement
Pipe Size	DN32 - DN6000 mm
Medium Temperature	-30℃ ~160℃
Medium	Water,seawater,sewage,beer,alcohol,Acid-base liquid, oils,etc, All Homogeneous liquids which can conduct ultrasound
Pipe Material	Steel,stainless steel,cast iron,copper,PVC,aluminium,glass fiber,etc. All dense pipes,liner is available.
Signal Output	4~20 mA
	OCT pulse
	Relay
Signal Input	4-20mA, three channels, can be used for data collector; Tri-wire resistance signal input (PT100): two channels, can be used for calorimeter.
Communication Interface	Isolated RS485 serial interface,support Modbus.
Power Supply	DC8~36V, AC10~30V

philemoninstrument@gmail.com
+0086-371-26665538

Principle
Ultrasonic water meter is designed to measure the fluid velocity of liquid within a closed conduit. The transducers are a non-contacting, clamp-on type, which will provide benefits of non- fouling operation and easy installation.

Transit time ultrasonic flow meter send and receive ultrasonic waves between transducers in both the upstream and downstream directions in the pipe. At no flow conditions, it takes the same time to travel upstream and downstream between the transducers. Under flowing conditions, the upstream wave will travel slower and take more time than the (faster) downstream wave. When the fluid moves faster, the difference between the upstream and downstream times increases. The transmitter processes upstream and downstream times to determine the flow rate.

Features
• 0.5% of linearity
• 0.2% of repeatability
• 4 flow totalizers
• Patent balanced lower-voltage multi-pulse ultrasonic igniting
• built-in date totalizers
• built-in data-logger
• Work properly near transverters
• 0.5 second totalizing period
• 100 Pico-second resolution of time measurement

Philemon Instrument Co, LTD. | Philemon CMS

V-method Installation

V-method installation is the moswidely used mode for daily measurement with pipe inner diameters ranging from 15 millimeter to 200 millimeter. It is also called reflective mode or method.

v type

Z-method Installation

Z-method is commonly used when the pipe diameter is between 300 millimeters and 500 millimeters.

W-method Installation

W-method is usually used on plastic pipes with a diameter from 15 millimeters to 100 millimeters

w type

certificate

Philemon Instrument Co, LTD. | Philemon CMS

Inquiry

If you have any suggestions or opinions about our products,please leave a message,and we will immediately answer your questions. Thanks for your support.E-mail:philemoninstrument@gmail.com Tel:+0086-371-26665538

Previous Article:Electromagnetic Flow Meter

Next Article:Ultrasonic Flow Meters