Welcome to Philemon Instrument
.jpg)
.jpg)
.jpg)
Smart electromagnetic flow meter is hallmarked by its high performance and reliability that are based on successful, field-proven technology.
.jpg)
.jpg)
Installation Notice
Installed at the lowest point and vertical upward direction Install exhaust valve at the downstreat of flow meter
Don’t install at the highest point and vertical downward diection when drop is more than 5m
Installed at the lowest point when used in open drain pipe Need 10D of upstreat and 5D of downstreat
exit of pump
.jpg)
| Model | DN10~DN100mm | ||
|---|---|---|---|
| Nominal Pressure | 0.6~1.6MPa, 2.5Mpa, 4.0Mpa, 6.4Mpa...42Mpa | ||
| Accuracy | ±0.5%,±0.3% or ±0.2% | ||
| Liner material | PTFE,EEP,PFA,F46,Neoprene,Hard rubber | ||
| Electrode Type | General type ,scraper type and replaceable type | ||
| Electrode material |
Stainless steel SUS316,Hastelloy C,Titanium,Tantalum Platinumiridium, Stainless steel covered with tungsten carbide |
||
| Mediem temperature | Integrate type | -20°C~+60°C | |
| Remote type | Neoprene & Polyurethane Liner | -10°C~+80°C | |
| PTFE Liner /PFA Liner /F46 Liner | -10°C~+160°C | ||
| Ambient Temperature | -25°C ~+ 60°C | ||
| Ambient Humidity | 5~100%RH(relative humidity) | ||
|
Medium Electrical conductivity |
>5 μs/cm | ||
| Measuring Range | 1500:1,flow rate<15m/s | ||
| Structure type | Integral type,remote type,submersible type,ex-proof type | ||
| Protection Class | IP65,IP68(optional) | ||
| Ex-proof Mark | ExmdⅡT6 | ||
| Product Standard | JB/T 9248-1999 Electormagnetic Flowmeter | ||
| Electrode material | Applications |
|---|---|
| sainless steel SUS316 | Applicable in water,sewage and corrosive mediums. |
| Widely used in industries of petrol,chemistry,carbamide,etc | |
|
Stainless steel covered with tungsten carbide |
Applicable in mediums of no corrosive and low abrasion. |
| Hastelloy B(HB) |
Having strong resistance to hydrochloric acid of any consistance which is below bioling piont. |
| Also resistable against vitriol,phosphate, | |
|
hydrofluoricacid,organic acid etc which are oxidable acid,alkali and non-oxidable salt. |
|
| Hastelloy C(HC) | Be resistant to oxidable acid such as nitric acid,mixed acid |
| as well as oxidable salt such as Fe+++,Cu++aStnd sea water | |
| Titanium |
Applicable in seawater,and kinds of chloride,hypochlorite salt,oxidable |
|
Not resistant to a pure reducing acid(such as sulphuric acid,hydrochloric |
|
| But if acid contains antioxidant is greatly reduce corrosion. | |
| Tantalum | Having strong resistance to corrosive mediums that is similar with glass |
| Almost is applicable to all chemical mediums. | |
| Except for hydrofluoric acid,oleum and alkali. | |
| Platinum-iridium | Almost be applicable in all chemical mediums except for ammonium salt. |
.jpg)
(3).png)
(2).jpg)
