The split electromagnetic flowmeter is likely to be damaged during the operation process. So what are the reasons for the damage to the split electromagnetic flowmeter? Next, the flowmeter manufacturer Philemon Instrument will give you the following brief description.

 

1. Inner wall adhesion layer

 

Because the electromagnetic flowmeter measuring method with floating solid phase or dirty body is far more than other flow meters, the probability of failure caused by the inner wall adhesion layer is relatively higher. If the conductivity of the adhesion layer is similar to the conductivity of the liquid, the meter can still output signals normally, but it changes the smooth area, which constitutes a hidden fault problem of measurement method deviation; once the high conductivity adhesion layer, the electromotive force between the electrodes will be short-circuited; Once the insulating adhesion layer, the electrode appearance is insulated and disconnect the measurement method circuit.

 

2. Lightning strike

 

Lightning strikes feel instantaneous high voltage and surge current in the line, and entering the meter will destroy the meter.

 

Split electromagnetic flowmeter.jpg

 

3. Reasons for working environment

 

Most of the faults caused by external factors are caused by interference signals such as external electromagnetic waves, motor magnetic fields, and stray currents. External electromagnetic wave interference signals are mainly introduced by signal cables, and generally single-layer or multilayer shielding is used for protection. Generally speaking, the current interference signal can obtain a satisfactory measurement method by adopting a relatively good separate grounding protection.